- For pumping out the house after a flood
- For pumping out a swimming pool
- For pumping out ponds and swimming ponds
Description
Larger water volumes are its speciality: the SP 5 Dirt dirty water pump, with a maximum capacity of 9,500 l/h, reliably pumps dirty water with dirt particles up to 20 millimetres in size, e.g. from garden ponds or flooded cellars. For larger dirt, an optional prefilter protects against blockages. The slide ring sealing, which is familiar from the professional sector, has been installed to extend the lifetime of the device. The submersible pump has a float switch for automatically switching on and off. In addition, the float is fixed to a rail and is vertically adjustable. This allows water to be pumped out at a lower level. In manual mode it can even pump out down to a residual water level of 25 millimetres. And the Quick Connect connection thread enables particularly quick and uncomplicated connection of 1 1/4" hoses.
Features and benefits
Ceramic face seal.
For an extra long lifetime.
Float switch
Switches the pump on and off again according to the water level, preventing dry running.
Quick Connect
Connection thread for quick and uncomplicated connection of 1 1/4" hoses to the pump.
Specifications
Technical data
Weight | 4.65 kg |
---|---|
Dimensions | 22.9 × 23.8 × 30.3 cm |
Max. motor rating (W) | 500 |
Max. flow rate (l/h) | 9500 |
Delivery temperature, max. (°C) | 35 |
Delivery height / Max. pressure (m/bar) | 7 / 0,7 |
Max. grain size (mm) | 20 |
Max. immersion depth (m) | 7 |
Min. residual water, manual (mm) | 25 |
Residual water height (mm) | 25 |
Connection thread | G1 |
Cable length (m) | H05RN-F / 10 |
Supply voltage (Ph/V/Hz) | 230 – 240 |
Frequency (Hz) | 50 |
Reviews
There are no reviews yet.